Infocus XS1 ユーザーズマニュアル
Connection
15
Connecting a monitor
If you want to view your presentation close-up on a monitor as well as on the
screen, you can connect the D-SUB OUT signal output socket on the projector to
an external monitor with a VGA or VGA to DVI-A cable by following the instructions
below.
To connect the projector to a monitor (either through a VGA cable
or VGA to DVI-A cable):
The final connection path should be like that shown in the following diagram:
•
With a VGA cable:
•
With a VGA to DVI-A cable:
Note: Your monitor must be equipped with
a DVI input socket.
a DVI input socket.
1.
Connect the projector to a computer as described in
The D-SUB output only works when an appropriate D-SUB input is made
to the projector. Be sure the projector is connecting with the computer
using the D-SUB/COMP. IN socket, not the DVI socket.
to the projector. Be sure the projector is connecting with the computer
using the D-SUB/COMP. IN socket, not the DVI socket.
2.
Take a suitable VGA cable (only
one supplied) and connect one
end of the cable to the D-Sub
input socket of the video
monitor.
one supplied) and connect one
end of the cable to the D-Sub
input socket of the video
monitor.
3.
Connect the other end of the
cable to the D-SUB OUT socket
on the projector.
cable to the D-SUB OUT socket
on the projector.
2.
Take a VGA to DVI-A cable and
connect the DVI end of the cable
to the DVI input socket of the
video monitor.
connect the DVI end of the cable
to the DVI input socket of the
video monitor.
3.
Connect the VGA end of the
cable to the D-SUB OUT socket
on the projector.
cable to the D-SUB OUT socket
on the projector.
Notebook or desktop computer
(VGA)
(DVI)
i. VGA to DVI-A
cable
ii. VGA cable
iii.VGA cable
iii.VGA cable