Infocus IN2126a ユーザーズマニュアル

12

Shutting down the projector

Auto Off Time

The projector also has an Auto Off Time feature that automatically turns the projector off 

after no active sources are detected and no user interaction with the projector is performed 

for 30 minutes. By default, this feature is off. You can change the length of time, see page 30.

Turning off the projector

To turn the projector off, press the 

Power

 button on the remote or keypad. The lamp turns 

off and the Power LED blinks blue for 30 seconds while the fans continue to run to cool the 

lamp. If the Power Saving Mode feature is on and when the lamp has cooled, the LED lights 

blue and the fans stop. If the Power Saving Mode feature is off and when the lamp has cooled, 

the LED blinks blue and the fans stop. Unplug the power cable to completely power off the 

projector.

Troubleshooting your setup

If your image appears correctly on the screen, skip to the next section. If it does not, 

troubleshoot the setup.

The Status Indicator Lights on top of the projector indicates the state of the projector and 

can help you troubleshoot.

Table 3: Indicator Lights

Status Indicator Light

Meaning

POWER: Solid Blue
TEMP: Off
LAMP: Off

POWER: Blinking Blue
TEMP: Off
LAMP: Off

1. If the Power Saving Mode feature is on, 
the projector is plugged in.
2. The projector is on and initialized.
3. The projector is in normal operation.

1. If the Power Saving Mode is off, the 
projector is plugged in.
2. The projector is powering down and 
the fans are cooling the projector.

POWER: Blinking blue
TEMP: Blinking red
LAMP: Blinking red

POWER: Solid blue
TEMP: Blinking red
LAMP: Blinking red

The projector fan(s) are not operating 

correctly and the projector has been shut 

down.

The lamp failed to ignite.

Contact Technical Support if the problem 

persists. Visit www.infocus.com/support 

to contact service.

POWER: Solid blue
TEMP: Blinking red
LAMP: Blinking red

The lamp has reached its end of life and 

must be replaced. The lamp will continue 

to operate until it fails.

Contact Technical Support. Repair may be 

needed.

POWER: Solid blue
TEMP: Blinking red
LAMP: Off

1. The projector is overheating and the 

lamp will be shut off. The fans will 

continue to run.

2. The projector will not turn back on 

until the cooling process is complete.