Infocus IN2126a ユーザーズマニュアル

32

Wireless connection

To connect to the projector wirelessly, you need to plug an optional InFocus 

wireless dongle (p/n SP-WIFIUSB-2) to the USB Type A connector on the 

projector.

How to setup AP mode:

1

Make sure the projector is turned on.

2

Select Type-A from source list.

3

Go to Settings > WiFi, select AP Mode and set it to ON. See page 47. AP 
mode is set to ON by default. 

4

Press Menu on the keypad or remote and then go to Advanced Menu > Setup 
> Network menu.

5

Make sure SSID and IP Address information are displayed.

6

Select LAN from source list. 

The network page displays.

7

The IP address and a passcode for EZ Display will display on the screen. Write 
down the IP address for network connection. 

How to setup client mode:

1

Select Type-A from source list.

2

Go to Settings > WiFi, select Client Mode and set it to ON. See page 47. 

3

Choose the Wi-Fi network which the projector connect to from the Wi-Fi 
network list, and press Select/Enter.

4

Press Select/Enter to display on-screen keyboard, enter the password from 
the on-screen keyboard, then press Menu to close the keyboard.

5

Highlight OK and press Select/Enter to connect.

6

Select WLAN from the source list. Client Info page displays.

InFocus wireless dongle

(p/n SP-WIFIUSB-2)

AP Info

AP                       IN2124-989299
IP                        192.168.111.1
PSK

PassCode
2831

Client Info

AP             135
IP              192.168.43.81

PassCode
5124