Infocus LP750 ユーザーズマニュアル
I n v e r t i n g t h e I m a g e
10
When you need to remove the projector or replace
the lamp:
the lamp:
1
Disconnect all cables.
2
Hold the projector from underneath.
3
Remove the knurled knob that holds the pro-
jector to the mounting plate.
jector to the mounting plate.
4
Slide the projector to release it from the quick
release bolts. The projector will come off of
the mounting plate. The mounting plate will
still be attached to the base box.
release bolts. The projector will come off of
the mounting plate. The mounting plate will
still be attached to the base box.
5
Replace the lamp as described in your LP 750
User’s Guide if needed.
User’s Guide if needed.
6
Realign the quick release bolts in the keyhole
slots on the mounting plate.
slots on the mounting plate.
7
Fasten the knurled knob.
ADJUSTING THE IMAGE
Inverting the Image
1
Press the
Menu
button on the keypad or
remote to display the projector’s on-screen
menus.
menus.
2
Using the disk mouse, move the cursor to the
Controls menu to display the Controls drop-
down menu.
Controls menu to display the Controls drop-
down menu.
3
Move the cursor to
Ceiling project
, then click
the right mouse button.