Infocus AA0021 ユーザーズマニュアル
38
Displaying PtG presentations
Follow these steps to show a slideshow presentation using Presentation-to-Go (PtG)
presentation. This will preserve most PowerPoint embedded videos, transition
effects, and animations. (Note: these instructions apply to PowerPoint 2007 in
Windows; for other presentation programs refer to the presentation program's
instructions or help file for the steps needed to save a presentation as separate JPEG
files.)
presentation. This will preserve most PowerPoint embedded videos, transition
effects, and animations. (Note: these instructions apply to PowerPoint 2007 in
Windows; for other presentation programs refer to the presentation program's
instructions or help file for the steps needed to save a presentation as separate JPEG
files.)
To convert a PowerPoint presentation to a PtG presentation:
1
Download and install the PtG Converter software onto your computer (avail-
able on www.infocus.com/support).
2
Close all open computer applications.
3
Open the PtG Converter Lite program and click the Convert button.
4
Navigate to the desired PowerPoint presentation and click OK to begin conver-
sion.
5
When the conversion is complete, a “Conversion Complete” message will dis-
play. Click OK.
To display the PtG presentation:
1
Connect a USB flash drive to your computer and copy PtG presentation from
your computer to the USB flash drive.
your computer to the USB flash drive.
2
Turn on your projector if needed.
3
Remove the USB flash drive from your computer and plug it into the USB A
connector on the rear of the projector.
connector on the rear of the projector.
4
The projector will display the LitePort menu.
5
Click PtG and navigate to the desired presentation using the arrow buttons on
the projector keypad or remote.
the projector keypad or remote.
6
Click Select to display the desired presentation.
7
Use the arrow buttons to navigate through the presentation.
To stop displaying the presentation: click the Menu button.
Troubleshooting LitePort
•
If images load slowly: Make sure you are using a newer USB 2.0-
compatible (high speed) USB flash drive. Larger image file sizes may also
slow down the player; to reduce file size, use an image editing program on
your computer to resize images smaller; for the best balance between image
quality and speed, resize images to be 1024 pixels wide.
slow down the player; to reduce file size, use an image editing program on
your computer to resize images smaller; for the best balance between image
quality and speed, resize images to be 1024 pixels wide.
•
If no images are found, or some images are not shown, or you only see folder
thumbnails but no images: Make sure that images are JPEG file type (file
extensions .JPEG and .JPG); other file types are not supported and will be
ignored.
thumbnails but no images: Make sure that images are JPEG file type (file
extensions .JPEG and .JPG); other file types are not supported and will be
ignored.
•
Using the Source button, make sure you have the LitePort source selected and
make sure your USB flash drive is correctly and completely plugged in to the
projectors LitePort connector.
make sure your USB flash drive is correctly and completely plugged in to the
projectors LitePort connector.
•
If nothing happens when you connect your USB flash drive, and you cannot
select the LitePort input source as described above: Check the format of your
USB storage device. LitePort only supports USB storage devices formatted as
FAT32. Devices formatted as NTFS, and non-storage devices (such as
cameras) are not supported.
select the LitePort input source as described above: Check the format of your
USB storage device. LitePort only supports USB storage devices formatted as
FAT32. Devices formatted as NTFS, and non-storage devices (such as
cameras) are not supported.