Infocus EN 61000-3-2 ユーザーズマニュアル

ページ / 43
33
NOTE
: Use only approved accessories.
Red LED behavior and projector errors
If the projector is not functioning properly and the red LED is blinking, con-
sult Table 2 to determine a possible cause. There are two second pauses 
between the blinking cycles. Visit www.infocushome.com/support for 
more details on the red LED error codes.
Projected image size
NOTE
: Visit our website at www.infocushome.com/support for an interac-
tive image size calculator.
Table 3: Red LEDs
Red LED Behavior
Explanation
One (1) blink
The lamp won't strike after five (5) 
attempts. Check the lamp and lamp door 
installations for loose connections.
Three (3) blinks
The projector has shut down the lamp. 
Turn off the projector, wait one minute, 
then turn it back on. Replace the lamp if 
the projector does not turn on. Contact 
Technical Support for repair if replacing 
the lamp does not solve the problem.
Four (4) blinks
The fan has failed. Replace the lamp (the 
lamp module contains a fan). Contact 
Technical Support for repair if replacing 
the fan does not solve the problem.
Five (5) blinks
The projector is overheating. Check for a 
blocked air vent. Contact Technical Sup-
port for repair if clearing the air vents 
does not solve the problem.
Table 4: 
Range of projection distances for a given screen size 
16:9 Screen 
dimensions 
(inches/m) 
Projection Distance
Screen 
diagonal
(inches/m)
Maximum 
zoom
(feet/m)
Minimum 
zoom
(feet/m)
27x48
.69x1.22
55.1/1.4
8.1/2.5
10.2/3.1
34x60
.9x1.5
68.8/1.75
10.1/3.1
12.7/3.9
40.5x72
1.0/1.8
82.6/2.1
12.1/3.7
15.3/4.7
45x80
1.1x2.0
91.8/2.3
13.4/4.0
17.0/5.1
49x87
1.2/2.2
99.8/2.5
14.6/4.4
18.5/5.6
52X92
1.3X2.3
105.6/2.7
15.4/4.7
19.6/6.0
54X96
1.4X2.4
110.1/2.8
16.1/4.9
20.4/6.2
58X104
1.5X2.6
119.3/3.0
17.4/5.3
22.1/6.7
65X116
1.7X3
133.1/3.4
19.5/6.0
24.6/7.6