Infocus IN100 ユーザーズマニュアル

Operation

To cancel the timer, perform the following steps.

Enter the

SYSTEM SETUP: Basic > Presentation Timer menu and highlight

Off. Press MODE/ENTER. A confirmation message displays.

Highlight

Yes and press MODE/ENTER to confirm. You will see the message

“

Timer is Off” displaying on the screen.

Hiding the image

In order to draw the audience's full attention to
the presenter, you can use

BLANK on the

projector or remote control to hide the screen
image. Press any key on the projector or remote
control to restore the image.

The word '

BLANK'

appears at the lower right corner of the screen
while the image is hidden.

You can set the blank time in the

SYSTEM

SETUP: Basic > Blank Timer

to let the projector return the image

automatically after a period of time when there is no action taken on the blank
screen.

Once BLANK is pressed, the projector enters Economic mode automatically.

CAUTION
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.

Locking control keys

With the control keys on the projector locked, you can prevent your projector
settings from being changed accidentally (by children, for example). When the

Panel Key Lock is on, no control keys on the projector will operate except

POWER.

Press

/ on the projector or remote

control or go to the

SYSTEM SETUP:

Basic > Panel Key Lock menu

, and

select

On by pressing

on the

projector or remote control.

A confirmation message displays. Select
Yes to confirm.

To release panel key lock, press and hold

for 3 seconds on the projector or remote control.

You can also use the remote control to enter the

SYSTEM SETUP: Basic > Panel

Key Lock and press

to select

Off.

•

Keys on the remote control are still in use when panel key lock is enabled.

•

If you press POWER to turn off the projector without disabling panel key lock, the
projector will still be in locked status the next time it is turned on.

35.