Sony PAM-200 ユーザーズマニュアル

 

PAM-200 

 

 

 

Installation Manual  

Page - 5 - 

Unpack the PAM-200

 

and review any WARNING statements that apply to the installation. Select the desired 

location for the PAM-200. 

 

1.  Locate the mounting points on the bottom of the projector 
 

(see arrows above for mounting point recognition). 

 

 

2.  Line up the mounting holes on the PAM-200 with the 
 

mounting points of the projector. 

3.  Use three (3) M4 x 10mm security head screws to attach the 
 

PAM-200 to the projector.  

4.  Tighten the security head screws down with a M5
 

Security Allen wrench (supplied). 

5.  Do not overtighten these screws, as the threaded inserts can 
 be 

damaged. 

 

 

When mounting the PAM-200 to a Sony projector, it is imperative that the projector plate not cover any access plates that allow the 
user to access the interior of the projector. The following steps will allow the user to mount the PAM-200 projector bracket to the 
Sony projector without fear of blocking any ventilation access plates. 

 

 

 

1.  Locate the mounting points on the bottom of the projector 
 

(see arrows above for mounting point recognition). 

2.  Place the nylon spacers over the mounting points. 

3.  Line up the mounting holes of the PAM-200 with the 
 

nylon spacer mounting holes. 

4.  Use three (3) M4 x 16mm security head screws to attach the 
 

PAM-200 to the projector. 

5.  Tighten the security head screws down with a M5
 

Security Allen wrench (supplied). 

6.  Do not overtighten these screws, as the threaded inserts can 
 be 

damaged. 

M5 Allen Wrench 

M4 x 10mm Security Head 
Screw 

Nylon Spacer 

M4 x 16mm Security Head 
Screw 

M5 Allen Wrench 

Nylon Spacer