Toshiba EO1-33027E ユーザーズマニュアル

Appendix 5          System Mode

102

Select the issue mode for the print test: “[S] NO CUT” (Batch
mode without cutting) or “[C] WITH CUT” (Cut Mode).
After selecting the issue mode, press the  PAUSE  key.

Specify whether a back feed will be performed when printing the
test print.  Select “YES” for back feeding.
After selecting the back feed option, press the  PAUSE  key.

Select the print quality for the test print: “HIGH” (ribbon saving
disabled) or “NORMAL” (ribbon saving enabled).
If “HIGH” is chosen, print quality is higher.
After selecting the print quality, press the  PAUSE  key.

Select a label size for the test print.  The acceptable values are
10mm to 1050mm.
After selecting the label size, press the  PAUSE  key.

To feed the media before the test print, press the  PAUSE  key.
If media feed is not necessary, select “PAPER NO FEED” using
either  FEED  or  RESTART  key.
The message returns to “<3> TEST PRINT”.

After “<3> TEST PRINT” is shown, press the  PAUSE  key.

Press the  FEED  key again.

Press the  PAUSE  key to start printing the slant line pattern for
Head 1.
After the printing completes, the message returns to “<3> TEST
PRINT”.
Press the  PAUSE  key.  “SLANT LINE 1” appears again.  Press
the  FEED  key.

Test Print: Slant Line Pattern