Toshiba EO1-33027E ユーザーズマニュアル
Chapter 2 Printer Installation
20
Feed Gap Sensor Sensitivity Adjustment
(for Label with Gaps)
(for Label with Gaps)
1 Open the Top Cover.
2 Lift the Pinch Roller Lever to the ROLLER RELEASE position
to open the Pinch Roller Unit.
3 Insert the label with gaps into the Media Inlet so that the Feed
Gap Sensor can detect the LABEL part.
4 Lock the Pinch Roller Unit.
5 Turn on the printer.
6 Turn the Feed Gap Sensor Adjusting Knob to the left most position.
7 Keep turning the knob clockwise slowly. When the upper two
Feed Gap Sensor Lamps illuminate green, the adjustment is
complete.
complete.
Feed Gap Sensor Sensitivity Adjustment
(for Media with Rectangular Holes)
(for Media with Rectangular Holes)
1 Open the Top Cover.
2 Lift the Pinch Roller Lever to the ROLLER RELEASE position
to open the Pinch Roller Unit.
3 Insert the media with rectangular holes into the Media Inlet so
that the Feed Gap Sensor can detect the PAPER part.
4 Lock the Pinch Roller Unit.
5 Turn on the printer.
6 Turn the Feed Gap Sensor Adjusting Knob to the left most position.
7 Keep turning the knob clockwise slowly. When the upper two
Feed Gap Sensor Lamps illuminate green, the adjustment is
complete.
complete.
Note:
As soon as the upper two lamps
illuminate green, stop turning the knob.
illuminate green, stop turning the knob.
Note:
As soon as the upper two lamps
illuminate green, stop turning the knob.
illuminate green, stop turning the knob.