Toshiba B-SX4T ユーザーズマニュアル

APPENDIX 2 INTERFACE

ENGLISH VERSION EO1-33058

APPENDIX 2 INTERFACE

EA2- 4

LAN (Option: B-9700-LAN-QM-R)

Physical Layer:

IEEE802.3 10BASE-T/100BASE-TX

Number of ports:

Connector: RJ-45
LED status:

Link LED, Activity LED

LAN cable:

10BASE-T: UTP category 3 or category 5

100BASE-TX: UTP category 5

Cable length:

Segment length Max. 100 m

Wireless LAN (Option: B-9700-WLAN-QM-R)

Standard:

Conforming to IEEE802.11a, IEEE802.11b, and IEEE802.11g

Protocol:

IP (RFC791), ICMP (RFC792), UDP (RFC768), TCP (RFC793,896), ARP
(RFC826), HTTPD (RFC1866), TELNET, FTPD (RFC959), DHCP (RFC2131),
SNMP

Security protocol:

WEP (64 bits/128 bits/152 bits) or AES, AES-OCB (128 bits)

TKIP (only when using WPA, WPA-PSK)

TWSL (unique encryption)

Antenna:

Chip type, diversity antenna

Parameter setting:

via HTTP

Default IP address:

192.168.10.21

Default subnet mask:

255.255.255.0

NOTES:
1. For IP address setting, refer to the B-SX4T/SX5T Series Key Operation Specification stored in the CD-

ROM.

2. When a generally-used twisted pair Ethernet (TPE) or UTP cable is used, a communication error may

occur depending on your operating environment. In such case, you may be requested to use a shielded
twisted pair cable.

Link LED (Green)

Activity LED (Orange)

LED

LED Status

LAN status

10Mbps link or 100Mbps link is detected.

Link

OFF

No link is detected.

* Communication cannot be made while the

Link LED is off.

ON Communicating

Activity

OFF Idle

NOTE:
MAC address of the Wireless LAN module will be necessary when setting the MAC address filtering function of an
access point. Please ask a service person of your nearest TOSHIBA TEC service representative.