Toshiba B-SX4T ユーザーズマニュアル

ENGLISH VERSION EO1-33058 

2.9 Setting an Operating Environment

E2-32 

While “<4>DUMP MODE” is displayed on the LCD Message Display, 
press the 

[PAUSE] key to enter the Dump Mode. 

In the Dump Mode, data in the receive buffer are printed.  Data are 
expressed in hexadecimal values.  This operation allows the user to verify 
programming commands or debug the program.  

When “<4>DUMP MODE” appears, press the 

[PAUSE] key. 

Use the 

[FEED] or [RESTART] key to choose a receive buffer to be 

dumped. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
After selecting the receive buffer, press the 

[PAUSE] key. 

 
 
 
 
Use the 

[FEED] or [RESTART] key to select a printing method. 

 
 
 
 
 
 
 
 
 
 
 
After selecting a printing method, press the 

[PAUSE] key. 

<4>DUMP MODE 

BUFFER   RS-232C 

<4>DUMP MODE 

NOW PRINTING... 

<4>DUMP MODE 

 

ON LINE 

B-SX4T     Vx.x 

Turn off the power, and then on.

BUFFER    RS-232C 

BUFFER    NETWORK 

BUFFER    BASIC 1 

BUFFER   CENTRO. 

BUFFER    BASIC 2 

BUFFER    USB 

<4>DUMP MODE 

PRINT   ON DEMAND 

PRINT   ON DEMAND 

Prints 166 lines of data (approx. 50cm), then 
stops. 

* To print the subsequent data, choose a printing 
method again and press the 

[PAUSE] key

.  

Prints all data in the receive buffer, then stops.

PRINT   ALL 

BASIC Interpreter (Interface 

→ Interpreter buffer) 

BASIC Interpreter (Interpreter 

→ Printer buffer) 

BUFFER    RFID