Toshiba B-SX4T ユーザーズマニュアル

ENGLISH VERSION EO1-33058 

2.11 Print Test

E2-54 

 
 
 
 
 
 
 
 

After your operating environment has been set, perform a print test. 
 

1.  Perform a print test by using the Printer Driver or an Issue Command. 
 
  The printer driver’s Properties screen allows you to set the 

communication conditions, media size, and other printing conditions 
in accordance with your operating environment.  For details, refer to 
the Help for the Windows Printer Drivers screen. 

Example: Stock tab display of the Printer Driver’s Properties Screen 

 

 

Print Method: 

Direct thermal or thermal transfer is selectable.  

Sensor: 

Media sensor type is selectable. 

Issue Mode: 

Batch or strip is selectable. 

Cut: 

Whether to use the cutter or not is selectable.  

Fine Adjustment:

Adjustment values for the feed amount, cut/strip 
position, etc. can be set.  

2.  Confirm the print test result. 

• 

When a print start position, cut/strip position, or print tone needs to 
be adjusted: 

⇒ Section 2.12 Position and Print Tone Fine 

Adjustment 

 

• 

When pre-printed media is used, and if a print start position is not 
properly detected: 

⇒ Section 2.13 Threshold Setting  

 

Print Method

Sensor

Issue

Mode

Cut

Print Speed

Label Gap

Fine Adjustment