Canon S200SP ユーザーズマニュアル
Printer Properties Dialog Box Description
36
Printer Driver Functions (Windows)
(3)
Print Head Alignment
Aligns the print head. For details on print head alignment, refer to “
Aligns the print head. For details on print head alignment, refer to “
(4)
Nozzle Check
Prints the nozzle check pattern to ensure the print head nozzles are outputting ink
normally. For details, refer to “
Prints the nozzle check pattern to ensure the print head nozzles are outputting ink
normally. For details, refer to “
(5)
Ink Counter Reset
Resets ink counter to an initial value. Click every time you replace an ink tank while
you enable the low ink warning function.
Resets ink counter to an initial value. Click every time you replace an ink tank while
you enable the low ink warning function.
(6)
Low Ink Warning Setting
This allows you to enable the low ink warning function.
This allows you to enable the low ink warning function.
(7)
Custom Settings...
Click to modify the printer mode. Change the settings in the Custom Setting dialog
box and click Send to change printer mode.
Click to modify the printer mode. Change the settings in the Custom Setting dialog
box and click Send to change printer mode.
(8)
Start Status Monitor
Click to start the BJ Status Monitor, to check the printer status and the progress of
printing jobs.
Click to start the BJ Status Monitor, to check the printer status and the progress of
printing jobs.
Note
➤
In Windows XP/Windows 2000, you may not select any maintenance
function if you invoke this tab from your application. In such a case, open
the Printer Properties dialog box directly from the Start menu
(see page 22).
function if you invoke this tab from your application. In such a case, open
the Printer Properties dialog box directly from the Start menu
(see page 22).
S200.book Page 36 Saturday, September 22, 2001 2:20 PM