Xerox N17b ユーザーズマニュアル
Loading Paper
4-18
❖
DocuPrint N17/N17b User Guide
1
Open the paper drawer, and wait until tray fully lowers.
If you are not changing paper size, go to Step 3 below.
Otherwise, continue to Step 2.
Otherwise, continue to Step 2.
2
Adjust the end and side paper guides for paper size.
Ensure that both the top and bottom of the paper guides
are seated into the correct size slots.
are seated into the correct size slots.
3
Load paper using the opening in the side of the drawer.
Refer to Figure 4.5 on page 4-19 for correct paper
orientation.
Refer to Figure 4.5 on page 4-19 for correct paper
orientation.
The type of paper loaded (plain, prepunched,
letterhead, transparency, etc.) must be set using the
Tray 2 Type (or Tray 3 Type) item in the Control
Panel’s Tray Menu (refer to Chapter 3 of the System
Administrator Guide).
letterhead, transparency, etc.) must be set using the
Tray 2 Type (or Tray 3 Type) item in the Control
Panel’s Tray Menu (refer to Chapter 3 of the System
Administrator Guide).