Xerox 3315/DN ユーザーズマニュアル
Printing using Windows
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
User Guide
94
Printing using Windows
The following provides an overview of the print procedure and features available when printing using
Windows.
Windows.
Install Printer Software
You can install the printer software for local printing and network printing. To install the printer
software on the computer, perform the appropriate installation procedure depending on the printer in
use. The printer software also provides the Fax from PC function if selected during the installation
process.
software on the computer, perform the appropriate installation procedure depending on the printer in
use. The printer software also provides the Fax from PC function if selected during the installation
process.
A printer driver is software that lets your computer communicate with your printer. The procedure to
install drivers may differ depending on the operating system you are using. All applications should be
closed on your PC before beginning installation.
install drivers may differ depending on the operating system you are using. All applications should be
closed on your PC before beginning installation.
You can install the printer software for a local, networked or wireless printer using the typical or custom
method. For further information refer to the
method. For further information refer to the
System Administrator Guide
.
Local Printer
A local printer is a printer directly attached to your computer using a printer cable, such as a USB cable.
If your printer is attached to a network, refer to
If your printer is attached to a network, refer to
Note:
If the “New Hardware Wizard” window appears during the installation procedure, select
Close or Cancel.
1.
Make sure that the printer is connected to your computer and powered on.
2.
Insert the supplied CD-ROM into
your CD-ROM drive. The CD-ROM
should automatically run, and an
installation window appear.
your CD-ROM drive. The CD-ROM
should automatically run, and an
installation window appear.
•
If the installation window
does not appear, select the
Start button and then Run.
Type X:\Setup.exe,
replacing “X” with the letter
which represents your drive
and select OK.
does not appear, select the
Start button and then Run.
Type X:\Setup.exe,
replacing “X” with the letter
which represents your drive
and select OK.
•
If you use Windows Vista,
select Start > All programs
> Accessories > Run, and
type X:\Setup.exe. If the
AutoPlay
select Start > All programs
> Accessories > Run, and
type X:\Setup.exe. If the
AutoPlay
window appears in
Windows Vista, select Run Setup.exe in the Install or run program field, and select Continue
in the User Account Control window.
in the User Account Control window.
3.
Select Install Software.