Xerox 3117 ユーザーズマニュアル

U

SING

 P

RINT

 M

ATERIALS

3.4

• For  envelopes:

- Use only well-constructed envelopes with sharp, well 

creased folds.

- Do not use envelopes with clasps and snaps.
- Do not use envelopes with windows, coated lining, self-

adhesive seals, or other synthetic materials.

- Do not use damaged or poorly made envelopes.
- Only use envelopes recommended for laser printers. Before 

loading envelopes in the tray, make sure that they are 

undamaged and are not stuck together. 

- Do not feed stamped envelopes.

• For transparencies:

- Place them on a flat surface after removing them from the 

printer.

- Do not leave them in the paper tray for long periods of time. 

Dust and dirt may accumulate on them resulting in spotty 

printing.

- To avoid smudging caused by fingerprints, handle them and 

coated paper carefully.

- To avoid fading, do not expose the printed transparencies to 

prolonged sunlight.

- Only use transparencies recommended for use in laser 

printers.

- Ensure that transparencies are not wrinkled, curled, or have 

any torn edges.

• For  labels:

- Verify that their adhesive material can tolerate fusing 

temperature of 180 

o

C (356

o 

F) for 0.1 second.

- Make sure that there is no exposed adhesive material 

between them. Exposed areas can cause labels to peel off 

during printing, which can cause paper jams. Exposed 

adhesive can also cause damage to machine components.

- Do not load a sheet of them through the printer more than 

once. The adhesive backing is designed for one pass 

through the machine.

- Do not use labels that are separating from the backing 

sheet or are wrinkled, bubbled, or otherwise damaged.

- Only use labels recommended for laser printers.