Xerox 2060 ユーザーズマニュアル
Installation Planning Guide
7-1
7.
System connections
This chapter provides cable requirements for your DocuColor
NPS/IPS system. To ensure all of your cable requirements are
met, it is important to work with your Xerox representative.
NPS/IPS system. To ensure all of your cable requirements are
met, it is important to work with your Xerox representative.
Cable lengths
Cable lengths are important considerations in planning your
layout, as components can be separated only up to the length of
the data interface cables that connect them.
layout, as components can be separated only up to the length of
the data interface cables that connect them.
Cables supplied with the printer are long enough to meet the
needs of most installations. Some of these cables are specific
lengths to conform to engineering and safety standards.
needs of most installations. Some of these cables are specific
lengths to conform to engineering and safety standards.
Data cables
The printer components can be separated up to the length of the
data interface cables that connect them. The printer and
controller are connected by a 25-foot / 7.5 meter data cable.
data interface cables that connect them. The printer and
controller are connected by a 25-foot / 7.5 meter data cable.
Power cables
Power cable lengths for the 60 Hz environment are as follows:
Table 7-1. Power cable lengths
Power cable
Length
Printer controller
8 feet / 2.4 meters
Printer
10 feet / 3 meters
Table 7-2. Power cable lengths
Power cables
Length
Printer controller
15 feet / 4.6 meters
Peripheral cabinet
15 feet / 4.6 meters
Printer
15 feet / 4.6 meters