Xerox 2060 ユーザーズマニュアル
Supplies
A-4
Installation Planning Guide
•
Letterhead: Different inks and dry inks are used to produce
preprinted letterhead that may not pass through the printer
intact. It is recommended that you run a sample job through
the printer to determine output quality. The loading
orientation of letterhead paper depends on how the job is
programmed. It is recommended that a sample job always be
run first to determine output quality.
preprinted letterhead that may not pass through the printer
intact. It is recommended that you run a sample job through
the printer to determine output quality. The loading
orientation of letterhead paper depends on how the job is
programmed. It is recommended that a sample job always be
run first to determine output quality.
•
Tabbed inserts: Can be loaded into tray 3 as non-standard
paper. Tabbed inserts can be run from, but are not
recommended for, the optional tray 4 as non-standard paper.
paper. Tabbed inserts can be run from, but are not
recommended for, the optional tray 4 as non-standard paper.
When loading, the non-tabbed, short edge of the tabbed
insert should be the lead edge to the printer.
insert should be the lead edge to the printer.
•
Predrilled paper: Has a varying number of holes for use in
binders or binder rings. Before loading predrilled paper, fan it
to remove loose plugs that could cause paper jams.
binders or binder rings. Before loading predrilled paper, fan it
to remove loose plugs that could cause paper jams.
–
Simplex print jobs: Load the drilled paper into trays 1, 2,
or 3 with the holes positioned toward the rear of the paper
tray.
or 3 with the holes positioned toward the rear of the paper
tray.
–
Duplex print jobs: Load the drilled paper into trays 1, 2,
or 3 with the holes positioned toward the front of the paper
tray.
or 3 with the holes positioned toward the front of the paper
tray.
•
Perforated paper
•
Non-standard size paper: Paper (7.2 to 12.6 [LEF] or 7.2 to
19.2 [SEF]) can be loaded into tray 3 and optional tray 4.
Ensure that non-standard size paper is selected on tray 3 and
optional tray 4.
19.2 [SEF]) can be loaded into tray 3 and optional tray 4.
Ensure that non-standard size paper is selected on tray 3 and
optional tray 4.
•
Oversize paper: Paper (12 x 18” [SEF] or 12.6 x 17.7” /
SRA3 [SEF]) can be loaded in trays 1 and 2 after the paper
guides are removed by a Xerox service representative.
SRA3 [SEF]) can be loaded in trays 1 and 2 after the paper
guides are removed by a Xerox service representative.
Paper care
Once you have purchased your paper, you must be sure it is
stored and conditioned properly, so that it performs optimally in
the printer with a minimum of jams.
stored and conditioned properly, so that it performs optimally in
the printer with a minimum of jams.