Cino MP3200 ユーザーズマニュアル

Command Descriptions 

[Name]

Set horizontal and vertical motion units

[Format] ASCII 

GS P x y

 Hex 

1D 50 x y

 Decimal 

29 80 x y 

[Range] 0 

” x ” 255, 0 ” y ” 255 

[Default]

x = 203, y = 203 

[Description]

Sets the horizontal and vertical motion units to 1/x and 1/y inch, respectively.

‹

When x = 0, the default setting of the horizontal value is used. 

‹

When y = 0, the default setting of the vertical value is used. 

[Notes]

‹

The horizontal direction is perpendicular to the paper feed direction and the vertical 
direction is the paper feed direction. 

‹

The horizontal and vertical motion units indicate the minimum pitch used for calculating 
the values of related commands. 

‹

In standard mode, the following commands use x or y.

„

Commands using x: ESC SP, ESC $, ESC \, GS L, and GS W.

„

Commands using y: ESC 3, ESC J 

‹

In page mode, the following commands use x or y, when the starting position is set to the 
upper left or lower right of the printing area using ESC T.

„

Commands using 

x: ESC 3, ESC J, ESC W, GS $, and GS \

„

Commands using 

87

Preliminary Rev. 02