SATO GT412 ユーザーズマニュアル
Unit 5: Troubleshooting
SATO GT4xxe Series Operator Manual
PN 9001138B
Page 5-2
ERROR SIGNALS
Error No.
LCD Display
Description
01
Machine Error
Cause:
Remedy:
Alarm sound:
External signal:
Remedy:
Alarm sound:
External signal:
Circuit board problem.
Contact a sales outlet, dealer, or service center.
One long beep.
Machine error.
Contact a sales outlet, dealer, or service center.
One long beep.
Machine error.
02
Flash ROM Error
Cause(s):
Remedy:
Alarm sound:
External signal:
Alarm sound:
External signal:
1. Flash ROM cannot be accessed.
2. Illegal firmware operation requested by software.
Contact a sales outlet, dealer, or service center.
One long beep.
Machine error.
2. Illegal firmware operation requested by software.
Contact a sales outlet, dealer, or service center.
One long beep.
Machine error.
03
Parity Error
Cause(s):
Remedy:
Alarm sound:
External signal:
Alarm sound:
External signal:
1. RS-232C communication settings fail parity check.
2. Error in cable connection.
Ensure correct communication cables and settings.
Three short beeps.
Machine error.
2. Error in cable connection.
Ensure correct communication cables and settings.
Three short beeps.
Machine error.
04
Overrun Error
Cause(s):
Remedy:
Alarm sound:
External signal:
Alarm sound:
External signal:
1. RS-232C communication settings exceed legal values.
2. Error in cable connection.
Check and correct communication cables and settings.
Three short beeps.
Machine error.
2. Error in cable connection.
Check and correct communication cables and settings.
Three short beeps.
Machine error.
05
Framing Error
Cause(s):
Remedy:
Alarm sound:
External signal:
Alarm sound:
External signal:
1. Incorrect frame size for the RS-232C settings.
2. Cable connection trouble.
Check and correct communication cables and settings.
Three short beeps.
Machine error.
2. Cable connection trouble.
Check and correct communication cables and settings.
Three short beeps.
Machine error.
06
Buffer Overflow error
Cause(s):
Remedy:
Alarm sound:
External signal:
Alarm sound:
External signal:
1. Size of received data exceeds size of receiving buffer.
2. Mismatched send/receive communication protocols.
Establish the correct communication protocol.
Three short beeps
Machine error
2. Mismatched send/receive communication protocols.
Establish the correct communication protocol.
Three short beeps
Machine error