Epson S1D13504 ユーザーズマニュアル
Page 114
Epson Research and Development
Vancouver Design Center
S1D13504
Hardware Functional Specification
X19A-A-002-18
Issue Date: 01/01/30
9 Display Buffer
The system addresses the display buffer through the CS#, M/R#, and AB[20:0] input pins. When
CS# = 0 and M/R# = 1, the display buffer is addressed by bits AB[20:0] as shown in the following
table.
CS# = 0 and M/R# = 1, the display buffer is addressed by bits AB[20:0] as shown in the following
table.
The display buffer address space is always 2M bytes. However, the physical display buffer may be
either 512K bytes or 2M bytes. See Section 5.5, “Summary of Configuration Options” on page 31.
either 512K bytes or 2M bytes. See Section 5.5, “Summary of Configuration Options” on page 31.
The 512K byte display buffer is replicated in the 2M byte address space as shown below.
Figure 9-1: Display Buffer Addressing
The display buffer will contain an image buffer and may also contain a half-frame buffer.
Table 9-1: S1D13504 Addressing
CS#
M/R#
Access
0
0
Register access:
• REG[00h] is addressed when AB[5:0] = 0
• REG[01h] is addressed when AB[5:0] = 1
• REG[n] is addressed when AB[5:0] = n
0
1
Memory access: the 2M byte display buffer is addressed by
AB[20:0]
AB[20:0]
1
X
S1D13504 not selected
Image Buffer
Half-Frame Buffer
Image Buffer
Half-Frame Buffer
Image Buffer
Half-Frame Buffer
Image Buffer
Half-Frame Buffer
Image Buffer
Half-Frame Buffer
512K byte Memory
2M byte Memory
AB[20:0]
000000h
07FFFFh
080000h
080000h
0FFFFFh
100000h
100000h
17FFFFh
180000h
1FFFFFh