Epson S1D13504 ユーザーズマニュアル
Epson Research and Development
Page 17
Vancouver Design Center
Programming Notes and Examples
S1D13504
Issue Date: 01/02/01
X19A-G-002-07
3.3.2 Look-Up Table Organization
• The Look-Up Table (LUT) treats the value of a pixel as an index into an array of colors or gray
shades. For example, a pixel value of zero would point to the first LUT entry; a pixel value of 7
would point to the eighth LUT entry.
would point to the eighth LUT entry.
• The value inside each LUT entry represents the intensity of the given color or gray shade. This
value ranges between 0 and 0Fh.
• The S1D13504 LUT is linear; increasing the LUT number results in a lighter color or gray shade.
For example, a LUT entry of 0Fh into the red Look-Up entry will always result in a bright red
output.
output.
Table 3-7: Look-Up Table Configurations
Display Mode
4-Bit Wide Look-Up Table
Effective Grays/Colors on an
Passive Panel
RED
GREEN
BLUE
1 bpp gray
1 bank of 2
2 gray shades
2 bpp gray
4 banks of 4
4 gray shades
4 bpp gray
1 bank of 16
16 gray shades
8 bpp gray
2 banks of 8
8 gray shades
15 bpp gray
16 gray shades
16 bpp gray
16 gray shades
1 bpp color
1 bank of 2
1 bank of 2
1 bank of 2
2 colors
2 bpp color
4 banks of 4
4 banks of 4
4 banks of 4
4 colors
4 bpp color
1 bank of 16
1 bank of 16
1 bank of 16
16 colors
8 bpp color
2 banks of 8
2 banks of 8
4 banks of 4
256 colors
15 bpp color
4096 colors*
16 bpp color
4096 colors*
*
On a TFT panel the effective colors are determined by the interface width. (i.e. 9-bit=512, 12-bit=4096, 18-bit=64K
colors) Passive panels are limited to 12-bits (4096) through the frame rate modulator.
Indicates the look-up table is not used for that display mode