Epson S1D13504 ユーザーズマニュアル
Page 26
Epson Research and Development
Vancouver Design Center
S1D13504
13504CFG.EXE Configuration Program
X19A-B-001-04
Issue Date: 01/01/30
Edit LUT Setup
When a selection is highlighted in the LUT Setup window and Edit is clicked, the Edit LUT Setup
window is displayed. The Edit LUT Setup window lists parameters which can be edited, as shown
below in Figure 21, “13504CFG Edit LUT Setup.” In this example window, “Bits Per Pixel: 2” is
highlighted.
window is displayed. The Edit LUT Setup window lists parameters which can be edited, as shown
below in Figure 21, “13504CFG Edit LUT Setup.” In this example window, “Bits Per Pixel: 2” is
highlighted.
Note
A future release of 13504CFG will enable components in the lookup table palette to be edited.
(For example, the red, green, and blue components of LUT palette entry 0Fh could be edited.)
(For example, the red, green, and blue components of LUT palette entry 0Fh could be edited.)
Figure 21: 13504CFG Edit LUT Setup
LUT Parameter Edit
When a selection is highlighted for editing in the Edit LUT Setup window and Edit is clicked, the
LUT Parameter Edit window displays for parameter editing. See figure 22, “13504CFG LUT
Parameter Edit” below. In this example window, “Bits Per Pixel: 2” can be edited.
LUT Parameter Edit window displays for parameter editing. See figure 22, “13504CFG LUT
Parameter Edit” below. In this example window, “Bits Per Pixel: 2” can be edited.
Figure 22: 13504CFG LUT Parameter Edit