Epson S1D13504 ユーザーズマニュアル
Page 4
Epson Research and Development
Vancouver Design Center
S1D13504
13504VIRT Display Utility
X19A-B-004-05
Issue Date: 01/01/30
Usage
PC platform: at the prompt, type
13504virt
[/A]
[/W=???]
.
Embedded platform: execute
13504virt
and at the prompt, type the command line argument.
Where:
no argument
panning and scrolling is performed manually
/a
panning and scrolling is performed automatically
/w=???
for manual mode, specifies the width of the virtual
display which must be a multiple of 8 and less than
1024 (the default width is 1024 pixels); the maximum
height is based on the display memory and the width
of the virtual display
display which must be a multiple of 8 and less than
1024 (the default width is 1024 pixels); the maximum
height is based on the display memory and the width
of the virtual display
The following keyboard commands are for navigation within the program.
Manual mode:
↑
scrolls up
↓
scrolls down
←
pans to the left
→
pans to the right
HOME
moves the display screen so that the upper right of the
virtual screen shows in the upper right of the display
virtual screen shows in the upper right of the display
END
moves the display screen so that the lower left of the
virtual screen shows in the lower left of the display
virtual screen shows in the lower left of the display
Automatic mode:
Z
changes the direction of screen
Both modes:
B
changes the color depth (bits-per-pixel)
ESC
exits 13504VIRT
13504VIRT Example
1.
Type "13504virt /a" to automatically pan and scroll.
2.
Press "b" to change the bits-per-pixel from 1 bit-per-pixel to 2 bits-per-pixel.
3.
Repeat steps 1 and 2 for the following bits-per-pixel values:
1, 2, 4, 8, 15, and 16.
1, 2, 4, 8, 15, and 16.
4.
Press <ESC> to exit the program.