Epson S1D13504 ユーザーズマニュアル
Epson Research and Development
Page 11
Vancouver Design Center
Evaluation Board User Manual
S5U13504-D9000
Issue Date: 01/02/02
X19A-G-003-05
2.1.4 CRT Support
The S1D13504 has all the necessary signals to interface to an external RAMDAC so a CRT is
supported. The Brooktree Bt481A RAMDAC is supported on the S5U13504-D9000 evaluation
board.
supported. The Brooktree Bt481A RAMDAC is supported on the S5U13504-D9000 evaluation
board.
Refer to the Programming Notes and Examples, document number X19A-G-002-xx for
programming details.
programming details.
2.1.5 Adjustable LCD BIAS Power Supply
Most color 640x480 passive LCD panels require a positive power supply to provide between +23V
and +40V (I
and +40V (I
out
= 45mA). For ease of implementation, such a power supply has been provided as an
integral part of this design. The signal VDDH can be adjusted by R16 to provide an output voltage
from +23V to +40V and is enabled / disabled by the S1D13504 control signal LCDPWR.
from +23V to +40V and is enabled / disabled by the S1D13504 control signal LCDPWR.
LCDPWR is an output signal which follows a pre-defined power-up / power-down sequence
designed to protect the LCD panel from damage caused by the power supply being enabled in the
absence of control signals. Determine the panel’s specific power requirements and set the potenti-
ometer accordingly before connecting the panel.
designed to protect the LCD panel from damage caused by the power supply being enabled in the
absence of control signals. Determine the panel’s specific power requirements and set the potenti-
ometer accordingly before connecting the panel.