Epson S1D13504 ユーザーズマニュアル
Epson Research and Development
Page 17
Vancouver Design Center
Evaluation Board User Manual
S5U13504-D9000
Issue Date: 01/02/02
X19A-G-003-05
3.1.2 Bus Interface Timing
Refer to the S1D13504 Hardware Functional Specification, document number X19A-A-002-xx for
complete bus timing details.
complete bus timing details.
Note
A four-position DIP switch located on the S5U13504-D9000 allows for the following configura-
tions.
tions.
3.1.3 Memory Address (CS#, M/R#) Decode
The S1D13504 is a memory-mapped device for both the registers and display buffer access. The
specific memory address is solely controlled by the CS# and M/R# decode logic. The memory space
requirements are:
specific memory address is solely controlled by the CS# and M/R# decode logic. The memory space
requirements are:
• a 2M byte linear address range for the display buffer
• 47 bytes for the registers.
3.1.4 Makefpga file
Modifications to the makefpga file to accommodate the S1D13504 are:
1.
Bus model: this may differ depending on processor as far as interface requirements (signal def-
initions). Epson will provide this information for each given processor interface.
initions). Epson will provide this information for each given processor interface.
2.
Memory location: the system designer must determine the appropriate memory addresses for
the display buffer and register requirements.
the display buffer and register requirements.
3.2 Board Dimensions
To obtain the required number of interface signals, the S5U13504-D9000 utilizes two SmallTypeZ
slots (6 and 7). Board dimensions are 2.65x3.20 with both the CRT and LCD connectors accessible
on the outside edge.
slots (6 and 7). Board dimensions are 2.65x3.20 with both the CRT and LCD connectors accessible
on the outside edge.
3.3 Support Documentation Notes
Note that some files and/or documentation may refer to the S5U13504-D9000 as the S5U13504-
D9100.
D9100.
Table 3-4: DIP Switch Configuration
SW4
SW3
SW2
SW1
Function
x
0
0
0
SH-3 Bus Interface
x
0
0
1
MC68K Bus
1 Interface
x
0
1
0
MC68K Bus
2 Interface
x
0
1
1
Generic Bus Interface
0
x
x
x
WAIT# - active low
1
x
x
x
WAIT# - active high
Where 1 = closed/on and 0 = open/off