Emulex NP02 ユーザーズマニュアル
![Emulex](https://files.manualsbrain.com/attachments/a9f06904df68a16969329cee0d321b3316fb4c39/common/fit/150/50/630eec64b37fa4951c28d41e544ee407b01af1301ac246d0d1b2a6860802/brand_logo.jpeg)
9-4 Chapter 9
NOTE: If the Enable Automatic DHCP Configuration
option is not checked in the Installation Options
dialog box, all required procedures for manually
configuring TCP/IP must be completed as
described in the Windows NT System Guide.
dialog box, all required procedures for manually
configuring TCP/IP must be completed as
described in the Windows NT System Guide.
The N
ETWORK
S
ETTINGS
dialog box will open.
9) Select C
LOSE
.
10) Restart the computer.
A TCP/IP printer can now be created on this Windows NT computer.
Create a TCP/IP Printer
Use Print Manager to create a TCP/IP printer. The following information is
required:
required:
• The IP identifier of the host where the printer is connected.
This can be the DNS name or the IP address. A direct-connect printer
has its own IP identifier. A printer connected to a UNIX computer uses
the computer’s IP identifier.
has its own IP identifier. A printer connected to a UNIX computer uses
the computer’s IP identifier.
• The printer name as identified on the host.
This is the name defined on the UNIX computer or defined by the direct-
connect printer manufacturer.
connect printer manufacturer.
The computer where the TCP/IP printer is created must have TCP/IP
installed and configured with the TCP/IP Network Printing Support option.
installed and configured with the TCP/IP Network Printing Support option.
From the P
RINTER
menu in P
RINT
M
ANAGER
:
1) Select C
REATE
P
RINTER
.