FARGO electronic Pro-LX Laminating Card Printer/Encoder ユーザーズマニュアル
RESTRICTED USE ONLY
Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0)
183
Using the Card tab
Selecting the Card Size
Use this dropdown menu to select the standard, credit card size CR-80 cards. (Note: The
dimensions of the total print area for this card size appear in the Print Width and Print Length
boxes.)
dimensions of the total print area for this card size appear in the Print Width and Print Length
boxes.)
Step
Procedure
1
Click on the inches or mm option to choose the desired unit of measurement.
(Note: When designing a card format, always set the card size or page size
within the card design program to the exact dimensions of a CR-80 card.)
(Note: When designing a card format, always set the card size or page size
within the card design program to the exact dimensions of a CR-80 card.)
Selecting the Orientation
Use the Orientation option to select either Portrait or Landscape.
Step
Procedure
1
Select Portrait to cause the card to print in a vertical orientation.
OR
Select Landscape to cause the card to print in a horizontal orientation. (Note:
An icon illustrating a printed card helps represent the difference between the
two.)
An icon illustrating a printed card helps represent the difference between the
two.)
Determining the number of Copies
Use the up or down arrows to indicate copies required.
Step
Procedure
1
Specify the number of copies to be printed by clicking on the up or down arrows.
Clicking on the Test Print button
Use this option to send a simple self-test print to the Printer.
Step
Procedure
1
Install a full-color Print Ribbon as a requirement. Use this test print procedure to
ensure that the computer is effectively communicating with the Printer and that
the Printer is functioning properly.
ensure that the computer is effectively communicating with the Printer and that
the Printer is functioning properly.