Samsung CLP-550N ユーザーズマニュアル
S
OLVING
P
ROBLEMS
7.29
7
Replace [Color]
Toner
Toner
The corresponding toner
cartridge in your printer
is empty.
cartridge in your printer
is empty.
Replace Fuser
The lifetime of the fuser
is done.
is done.
Contact a service representative.
Replace Fuser Soon
The lifetime of the fuser
is nearly done.
is nearly done.
When “Replace Fuser” appears on
the display, replace the fuser.
the display, replace the fuser.
Replace
Imaging Unit
Imaging Unit
The lifetime of the
imaging unit is done.
imaging unit is done.
Replace the imaging unit with a
new one. See page 6.14.
new one. See page 6.14.
Replace Imaging
Unit Soon
Unit Soon
The lifetime of the
imaging unit is nearly
done.
imaging unit is nearly
done.
When “Replace Imaging Unit”
appears on the display, replace the
imaging unit.
appears on the display, replace the
imaging unit.
Replace MP
Roller
Roller
The lifetime of the MP
pickup roller is done.
pickup roller is done.
Contact a service representative.
Replace
Transfer Belt
Transfer Belt
The lifetime of the
transfer belt is done.
transfer belt is done.
Replace the transfer belt with a
new one. See page 6.22.
new one. See page 6.22.
Replace Transfer
Belt Soon
Belt Soon
The lifetime of the
transfer belt is nearly
done.
transfer belt is nearly
done.
When “Replace Transfer Belt”
appears on the display, replace the
transfer belt.
appears on the display, replace the
transfer belt.
Replace
Transfer Roller
Transfer Roller
The lifetime of the
Transfer Roller is done.
Transfer Roller is done.
Contact a service representative.
Replace Transfer
Roller Soon
Roller Soon
The lifetime of the
Transfer Roller is nearly
done.
Transfer Roller is nearly
done.
When “Replace Transfer Roller”
appears on the display, contact a
service representative.
appears on the display, contact a
service representative.
Replace Tray1
Roller
Roller
The lifetime of the Tray1
pickup roller is done.
pickup roller is done.
Contact a service representative.
Replace Tray2
Roller
Roller
The lifetime of the Tray2
pickup roller is done.
pickup roller is done.
Contact a service representative.
Transfer Belt
Error
Error
The transfer belt is
either not working or
not correctly installed in
the printer.
either not working or
not correctly installed in
the printer.
Replace the transfer belt.
OR
Make sure the installed transfer
belt is properly seated.
OR
Make sure the installed transfer
belt is properly seated.
Tray2 Error
Optional Tray2 is not
properly installed or
connected to the printer.
properly installed or
connected to the printer.
After turning the printer off and
then back on, reinstall the optional
tray2. If the message persists,
contact a service representative.
then back on, reinstall the optional
tray2. If the message persists,
contact a service representative.
Message
Status
Do this...