Roland SJ-645EX ユーザーズマニュアル
62
Chapter 4: A Wide Variety of Operations
4-5 Using Transparent Media
If the media loaded on the unit is transparent, then at the [SHEET TYPE] menu, select [CLEAR].
[SHEET TYPE] Selection Procedure
1
Press the [MENU] key, and press the [ ] key
to make the following screen appear on the dis-
play.
to make the following screen appear on the dis-
play.
2
Press the [
] key to make the following screen
appear on the display.
3
Use the [ ] and [ ] key to select [CLEAR],
then press the [ENTER] key.
then press the [ENTER] key.
4
Specify a printing area for the left-right direc-
tion (the direction of print-head carriage move-
ment) that matches the width of the media.
tion (the direction of print-head carriage move-
ment) that matches the width of the media.
For more information, refer to "4-4 Setting the Margins"
and see "Setting the Margins in the Scan Direction."
and see "Setting the Margins in the Scan Direction."
MENU
SHEET TYPE
SHEET TYPE
SHEET TYPE
OPAQUE OPAQUE
OPAQUE OPAQUE
SHEET TYPE
OPAQUE CLEAR
OPAQUE CLEAR
When [SHEET TYPE] is set to [CLEAR], the media width is not detected during media setup. This means it is necessary to
specify a printing area that matches the actual width of the media.
When only set to [CLEAR], the printable width is set to the maximum. For more information about printing area, see "8-2
Printing Area."
specify a printing area that matches the actual width of the media.
When only set to [CLEAR], the printable width is set to the maximum. For more information about printing area, see "8-2
Printing Area."
When [SHEET TYPE] is set to [CLEAR], the machine cannot detect when media runs out. In such cases, printing operation
does not stop when the media runs out, and there is a chance that the platen may become soiled by ink or that ink may get inside
and damage the machine. If the media while printing is in progress, immediately press the [PAUSE] key to quit printing.
does not stop when the media runs out, and there is a chance that the platen may become soiled by ink or that ink may get inside
and damage the machine. If the media while printing is in progress, immediately press the [PAUSE] key to quit printing.