Printronix SL5000r ユーザーズマニュアル
Installation
13
Installation
1.
Place the printer on a flat level surface that allows easy access
to all sides of the printer.
to all sides of the printer.
CAUTION
Never operate the printer on its side or upside down.
2.
Make sure the printer power switch is in the Off (O) position.
WARNING
Failure to properly ground the printer may result in electric
shock to the operator.
shock to the operator.
In compliance with international safety standards, this printer
has been equipped with a three-pronged power cord. Do not
use adapter plugs or remove the grounding prong from the
cable plug. If an extension cord is required, ensure that a
three-wire cable with a properly grounded plug is used.
has been equipped with a three-pronged power cord. Do not
use adapter plugs or remove the grounding prong from the
cable plug. If an extension cord is required, ensure that a
three-wire cable with a properly grounded plug is used.
3.
Attach the AC power cord to the AC power receptacle in the
back of the printer.
back of the printer.
CAUTION
Verify the required voltage on the printer’s model number label
on the back of the printer.
on the back of the printer.
4.
Attach the AC power cord to a grounded (three prong) electrical
outlet of the proper voltage.
outlet of the proper voltage.
AC Power
Receptacle
Power Switch