Printronix SL5000r ユーザーズマニュアル
QUICK SETUP Menu Items
53
Run A Barcode Demo Test
IMPORTANT
Printronix recommends using the supplied roll of 100 labels to
set up and verify printer operation. If you have an SL5000r, this
will avoid expending the more expensive smart labels for this
task.
set up and verify printer operation. If you have an SL5000r, this
will avoid expending the more expensive smart labels for this
task.
Before you send an actual print job, run a bar code demo test:
1.
Press the PAUSE key until OFFLINE displays.
2.
Press TEST PRINT until Printer Tests / Barcode Demo
displays.
displays.
3.
Press
↵
. The Barcode Demo test pattern will start and print two
bar codes.
4.
Check the test pattern. If necessary, reposition the pressure
blocks to obtain a uniform print quality. In most cases, you will
need to adjust only the right pressure block.
blocks to obtain a uniform print quality. In most cases, you will
need to adjust only the right pressure block.
5.
If desired, you can run additional printer tests, such as Grey,
Grid, and Checkerboard. See step 1 above to start other tests.
Grid, and Checkerboard. See step 1 above to start other tests.
NOTE: These tests run continuously by default. Press
↵
to end the
test.