Printronix SL5000r ユーザーズマニュアル
Cleaning The Printhead, Platen Roller, And Media Sensors
57
1.
Rotate the deck lock lever clockwise to open the pivoting deck
and remove any media and ribbon (if loaded) to gain access to
the printhead assembly heating element area.
and remove any media and ribbon (if loaded) to gain access to
the printhead assembly heating element area.
2.
Gently rub the felt tip of the cleaning pen or a cotton swab with
isopropyl alcohol across the printhead heating elements (light
brown area).
isopropyl alcohol across the printhead heating elements (light
brown area).
3.
Allow the printhead to dry for one minute before reloading the
media and ribbon.
media and ribbon.
4.
Clean the platen roller.
5.
Clean the upper and lower media sensors.
A
Upper
Media
Media
Sensor
Printhead
Heating
Elements
Heating
Elements
From page 56.