Primera Technology 63504 ユーザーズマニュアル

This operation may be useful to verify software installation

discs where it is extremely important to have accurate

copies of all installation files. Checking this option will

double the time it takes to record each disc. 

•

. If this option is

checked, all files on the disc will automatically be set to the

current time and date.

Double click on the bin icons at the bottom of the screen to

access these settings.
Here you can designate the type of media in the left and right

bins and finished bin location.
Kiosk Mode (Not available with 4051 models). By default,

PTPublisher assumes that discs are loaded into only the right

bin.  It picks from the right bin and places completed discs in

the left bin.  Check Kiosk Mode to make the robot pick blank

media from both the right and left bins.  Finished media will be

placed in Kiosk bin.  Kiosk Mode still requires the same type of

media in both the right and left bins. See Section 2D for

instructions on setting up the Kiosk bin.  

 (Not available with 4051 models). Enable Bin

Selection to use different types of media in the left and right

bins.  Check the box and set the media type to one of the avail-

able options.  Once Bin Selection is enabled the contents of the

bin will be reflected next to the bin icons. To take advantage of

this feature choose a specific type of media on step one of the

data project. Other project types will automatically select the

correct type of media.  When you queue multiple projects with

different media types the robot will now choose from the left

or right bin depending on what media type is selected in the

project and set for the bin.  All finished discs will be placed in

the kiosk bin.  

Note: PTPublisher has no way to verify if the actual discs loaded into the

511276.qxd  9/12/2011  4:15 PM  Page 22