Printronix T5000R ユーザーズマニュアル

23

2.

Face the front of the printer while installing the validator/upper 
bracket unit.

3.

Loosen the outside adjustment screw and remove the inside 
adjustment screw on the bottom of the validator.

4.

Slide the validator/upper bracket unit onto the lower bracket and 
align the hash marks with the alignment screw accordingly.

NOTE: Refer to Figure 9, Detail A for location of the validator hash 

mark for each printer model size. The printer model size is 
also inscribed on the lower bracket.

5.

When the unit is positioned correctly, tighten the outside 
adjustment screw on the validator to lock the unit into place.

A

A

4 in. 6 in. 8 in.

Printer

Lower 

Bracket

Hash 

Marks

Outside 
Adjustment 
Screw

Validator 

(Front View)

Validator 

(Rear View)

Upper 

Bracket

Alignment 

Screw

Inside 
Adjustment 
Screw