Printronix T5000R ユーザーズマニュアル
Advanced Validator Options
55
Advanced Validator Options
The following items are considered advanced items and are only
visible if Admin User is set to Enable (in the PRINTER CONTROL
menu). Refer to the configuration section of your
visible if Admin User is set to Enable (in the PRINTER CONTROL
menu). Refer to the configuration section of your
User’s Manual for
more information.
Decodeability
NOTE: This parameter factors into the Overall Grade (page 57).
You can determine how strict the validator grades the wide/narrow
bars and spaces which compose the bar code by setting the
Decodeability parameter to a percentage value from 30% to 90%.
The higher the percentage value chosen, the stricter the validator
grades. The default is 37%.
bars and spaces which compose the bar code by setting the
Decodeability parameter to a percentage value from 30% to 90%.
The higher the percentage value chosen, the stricter the validator
grades. The default is 37%.
For example, if the Decodeability value is set to 37%, the validator
gives the bar code a failing grade if the decodeability of the bar
code is at or below 37%.
gives the bar code a failing grade if the decodeability of the bar
code is at or below 37%.
1.
Press
to take the printer offline and place the printer in
Menu mode.
2.
If necessary, press
↓
and
↵
at the same time to unlock the
↵
key.
3.
If necessary, press
until VALIDATOR displays.
4.
Press
↑
until Decodeability displays.
5.
Press + or – to scroll through the percentage values: 30% to
90%. The default is 37%.
90%. The default is 37%.
6.
Press
↵
to select the desired value.
7.
Press
↓
and
↵
at the same time to lock the
↵
key, then press
PAUSE to take the printer offline.
8.
Press PAUSE again to put the printer online.
..
.
..
.