Primera Technology LX400 ユーザーズマニュアル

Max

Min

Distance from edge of 

1.90" (48.3mm)

0.20" (5.1mm)

media to edge of 

thru-hole
Reflective/Black 

Equal to distance 0.10" (2.5mm)  

Mark Width*

between labels

Max Outer Diameter (OD) 5.0"(127mm) 

N/A 

Inner Core Diameter (ID)

see roll specifications below

Stock Thickness

.006” 

N/A 

(152 micron)

Distance from edge of 

Printer driver assumes 2 mm gap. 

media to edge of label

However, this is adjustable via the 

left margin offset. 

* The Reflective/Black Mark should be opaque to infared light.

The mark should be between the labels. The end of the mark

should correspond with the beginning of the label. 

Label Side Out

Core I.D.

Core O.D.

Roll O.D.

Notes:

1.  Label height <1.5” requires a 2.00” I.D. x 3.00” O.D. core.
 

Label height >1.5” requires a 2.00” I.D. x 2.25” O.D. core.

2.  Turret glue or 1/2”-wide 3M 928 double-sided removable tape must be 
 

used to attach stock to core. Removable tape must be positioned across 

 

full width of core. Other types of tape are not allowed.

3.  End face of liner must align with end of core on both sides within 0.030”. 
 

(Core width should be the same as liner width.)

4.  Masking tape or equivalent may be used to secure label stock to outside of roll.

 

2”

5”

Label Stock

510984.qxd  11/30/2006  12:32 PM  Page 51