Ricoh CL3000e ユーザーズマニュアル
Operating Instructions
Administrator Reference
201
WINS
Use the wins command to configure the WINS server settings
For more information about WINS server settings, see
.
❖
❖
❖
❖ Configuration
Use the set command to make WINS active or inactive.
msh> set wins {on|off}
•
"on" means active and "off" means inactive.
auth [open|shared]
You can set the authorized mode when using WEP. The
specified value and the authorized mode are as follows:
specified value and the authorized mode are as follows:
open: Open system authorized (default)
shared: Shared key authorized
rate [auto|11m|5.5m|2m|1m]
You can set the IEEE 802.11b transmitting speed.
The transmitting speed you specify here is the speed at
which data is sent. You can receive data at any speed.
which data is sent. You can receive data at any speed.
auto: automatically set (default)
11m: 11 Mbps fixed
5.5m: 5.5 Mbps fixed
2m: 2 Mbps fixed
1m: 1 Mbps fixed
Parameter
Value to be configured