Ricoh CL3000e ユーザーズマニュアル

This is a list of messages written in the printer's system log. The system log can be viewed using the
syslog command.

You can use the following methods to view the system log.

•

telnet : Use the syslog command. See 

Access to NetWare server <file server name> denied. Ei-
ther there is no account for this print server on the Net-
Ware server or the password was incorrect. 

(In print server mode) Cannot log in to the file server. 
Make sure that the print server is registered on the file 
server. If a password is specified for the print server, de-
lete it.

add_sess: community<community name> already defined. The same community name already exists. Use another 

community name.

add_sess: session<community name>already defined.

A requested community name is not defined.

add_sess: bad trap addr:<IpAddress>, community:
<community name>

The IP address (0.0.0.0.) is unavailable when the commu-
nity access type is TRAP. Specify the host IP address for 
the TRAP destination.

add_sess_ipx: bad trap addr: <IPX address>, community:
<community name>

The IPX address (00:00:00:00:00:00) is unavailable 
when the community access type is TRAP. Specify the 
host IPX address for the TRAP destination.

add_sess_ipx: community <community name> already 
defined.

The same community name already exists. Use another 
community name.