Ricoh CL3000e ユーザーズマニュアル
Operating Instructions
Administrator Reference
231
•
With Windows 2000, clear the
[
Enable banner
]
check box under the
[
NetWare Settings
]
tab in the
Printer Properties dialog box.
•
With Windows NT 4.0, clear the
[
Enable banner
]
check box under the
[
NetWare Settings
]
tab in the
Printer Properties dialog box.
Printing after resetting the printer
After resetting the remote printer, it will be cut off from the print server for about 30-40 seconds before
connecting again. Due to the NetWare specification, print jobs may be accepted, but they will not be
printed during this interval.
connecting again. Due to the NetWare specification, print jobs may be accepted, but they will not be
printed during this interval.
When using the printer as a remote printer, wait about 2 minutes after resetting the printer before at-
tempting to print.
tempting to print.
Using DHCP
You can use the printer under a DHCP environment. You can also register the printer NetBIOS name
on a WINS server when it is running.
on a WINS server when it is running.
Limitation
❒
DHCP cannot be used with IEEE 1394 (IP over 1394). Set a fixed IP address with the control panel,
telnet or a Web browser.
telnet or a Web browser.
•
See the Setup Guide.
•
See
•
See