Ricoh LD320d ユーザーズマニュアル

11

This chapter describes likely causes of and possible solutions for copier function
problems.

This section describes the machine's main messages. If other messages appear,
follow the instructions they contain.

❒ For messages that are not listed here, see “When You Have Problems Operat-

ing the Machine”.

Cannot detect 

original size

Improper original is placed. 

Select paper manually, not with 
the Auto Paper Select function, 
and do not use the Auto Re-
duce/Enlarge function. See 
“Originals”, Copy Reference.

Cannot detect 

original size

Improper original is placed.

Input the both horizontal and 
vertical sizes of the non-standard 
original.

Cannot detect 

original size

Improper original is placed. 

Place the original on the exposure 
glass. See “Originals”, Copy Reference.

Cannot sort this 

size.

The specified paper size is not 
available with the Sort function.

This message appears when the by-
pass tray is selected. Use copy pa-
per that is not longer than 433 mm.

Cannot select 

Bypass Tray in 

current set-

ting.

The specified function is not 
available with the bypass tray.

Select a paper tray other than the 
bypass tray.

Original with 

this length can-

not be duplex 

scanned.

The specified custom length is not 
available for duplex printing 
from the ARDF (eg. 2 Sided → 2 
Sided, 2 Sided → 1 Sided, 2 Sided 

→ Combine).

Do not place originals that are 
longer than 433 mm.

Check original 

orientation.

Original is not placed in a proper 
orientation.

Change the orientation of the 
original.

Check paper 

size.

Improper paper size is set.

If you press the {Start} key, copy 
will start onto the selected paper.

Rotate Sort is 

unavailable 

with this paper 

size.

A size of paper for which Rotate 
Sort is not available is selected.

Select the proper paper size. See 
“Sort”, Copy Reference.