Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Lennox Hearth
  4. 4650EN
  5. ユーザーズマニュアル

Lennox Hearth 4650EN ユーザーズマニュアル

ダウンロード
ページ / 260
Solving Problems with Media Misfeeds 
191
Solving Problems with Media Misfeeds
"
Frequent misfeeds in any area indicate that area should be checked, 
repaired, or cleaned. Repeated misfeeds may also happen if you’re 
using unsupported print media.
Symptom
Cause
Solution
Several 
sheets go 
through the 
printer 
together.
The front edges of 
the media are not 
even.
Remove the media and even up the 
front edges, then reload it.
The media is moist 
from humidity.
Remove the moist media and replace it 
with new, dry media.
Too much static elec-
tricity is present.
Do not fan transparencies.
Media mis-
feed mes-
sage stays 
on.
Right side cover 
needs to be opened 
and closed again to 
reset the printer.
Open and close the right side cover of 
the printer again. 
Some media remains 
misfed in the printer.
Recheck the media path and make 
sure that you have removed all of the 
misfed media.
Duplex mis-
feeds.
Unsupported media 
(wrong size, thick-
ness, type, etc.) is 
being used.
Only plain paper, 60–90 g/m
2
 (16–24 
lb) can be autoduplexed. See “Media 
Specifications” on page 100..
Make sure that you have not mixed 
media types in Tray 1.
Do not duplex (double-sided) enve-
lopes, labels, thick stock, glossy, or 
transparencies.
Media is still being 
misfed.
Recheck the media path inside the 
duplex option and make sure that you 
have removed all of the misfed media.