Lexmark X466dte ユーザーズマニュアル
4
Align the notches on the memory card with the ridges in the connector.
1
Notches
2
Ridges
5
Push the memory card straight into the connector until it clicks into place.
Note: After the memory card is installed, make sure the memory card connector latches return to the latched
vertical position and are secure against the card.
vertical position and are secure against the card.
6
Release the system board access latch, and then close the system board door by lowering the scanner.
7
Push in on the screws while rotating them clockwise a quarter turn to lock the system board into place.
Warning—Potential Damage: Make sure the system board is locked to prevent possible damage to the printer if it
is moved.
is moved.
Additional printer setup
33