Lexmark X748de ユーザーズマニュアル
Paper jam in the fuser area
1
Open the printer top access cover.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
component, allow the surface to cool before touching it.
2
Open the front door.
Warning—Potential Damage: To avoid overexposing the photoconductor units, do not leave the front door
open for more than 10 minutes.
open for more than 10 minutes.
3
Determine where the jammed paper is located, and then remove it:
a
If the jammed paper is visible under the fuser, then firmly grasp the paper on each side, and then gently pull it
out.
out.
Note: Make sure all paper fragments are removed.
b
If the jammed paper is visible at the top paper guide in the fuser assembly, then firmly grasp the paper on each
side, and then gently pull it out.
side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
Clearing jams
261