Konica Minolta 2490MF ユーザーズマニュアル
Registering Recipients
110
"
If the one-touch dial key that is pressed is already registered with a
recipient, the message “REGISTERED!” appears. Press the Menu
Select key, and then press a one-touch dial key with no recipient reg-
istered.
recipient, the message “REGISTERED!” appears. Press the Menu
Select key, and then press a one-touch dial key with no recipient reg-
istered.
5
Enter the name of the one-touch dial to be programmed, and then press
the Menu Select key.
the Menu Select key.
"
Text up to 20 characters long can be entered for the name.
"
For details on entering/editing text and the characters that can be
entered, refer to “Entering Text” on page 206.
entered, refer to “Entering Text” on page 206.
"
To cancel programming, press the Cancel/C key. (To cancel program-
ming while the name is being entered, press the Menu Select key,
and then press the Cancel/C key.)
ming while the name is being entered, press the Menu Select key,
and then press the Cancel/C key.)
6
Using the keypad, enter the e-mail address of the recipient, and then
press the Menu Select key.
The entered information is programmed with the one-touch dial key, and
the message “SELECT REGIST.KEY” appears.
press the Menu Select key.
The entered information is programmed with the one-touch dial key, and
the message “SELECT REGIST.KEY” appears.
"
The fax number can contain a maximum of 50 characters.
"
For details on entering/editing addresses, refer to “Entering Text” on
page 206.
page 206.
"
To cancel programming, press the Cancel/C key. (To cancel program-
ming while the address is being entered, press the Menu Select key,
and then press the Cancel/C key.)
ming while the address is being entered, press the Menu Select key,
and then press the Cancel/C key.)
7
To program another one-touch dial key, press the one-touch dial key, and
then repeat the procedure starting from step 5.
OR
To finish the procedure and return to the Scan mode screen, continue
pressing the Cancel/C key until the Scan mode screen is displayed.
then repeat the procedure starting from step 5.
OR
To finish the procedure and return to the Scan mode screen, continue
pressing the Cancel/C key until the Scan mode screen is displayed.
Changing/Deleting One-Touch Dial Information
The registered one-touch dial information can be corrected.
1
Press the Menu Select key, then the , key three times.
2
Check that the FAX REGISTRATION screen appears, and then press the
Menu Select key.
Menu Select key.
3
Check that the ONE-TOUCH DIAL screen appears, and then press the
Menu Select key.
Menu Select key.
4
Press the one-touch dial key that you want to change or delete.
5
Press the Cancel/C key.