Konica Minolta 7135 ユーザーズマニュアル
8-44
Repeating Selected Image Area (Repeat: Verti./Horiz. Mode)
Use this function to repeat the selected image area of 10mm ~ 150mm in both vertical
and horizontal widths measured from the rear left corner of the 11”x17” original area
indicated on the left edge of the platen glass.
and horizontal widths measured from the rear left corner of the 11”x17” original area
indicated on the left edge of the platen glass.
>>>Vertical/Horizontal Width Setting Mode Specifications<<<
❒ Use the platen glass. (Document feeder cannot be used.)
❒ Incompatible Conditions: Using RADF, 2a2, 2a1, APS, AMS, Sort, Staple, Group,
Rotation Sort, Rotation Group, Sheet/Cover Insertion, Chapter, Combination,
Booklet, Transparency, Image Insert, Book Copy, Special Original (Mixed Original,
Folded Original, Non-Standard Size, Upside Down), Frame/Fold Erasure, AUTO
Layout, Image Shift, Non-Image Area Erase, Stamp
Booklet, Transparency, Image Insert, Book Copy, Special Original (Mixed Original,
Folded Original, Non-Standard Size, Upside Down), Frame/Fold Erasure, AUTO
Layout, Image Shift, Non-Image Area Erase, Stamp
1.
Press [APPLICATION] on the control panel.
Reminder!
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
press [AUTO RESET].
Vertical
width
width
Horizontal width
Repeat copy
Vertical/Horizontal Width Setting mode
2
3
1
5
6
4
8
9
7
0
CLEAR QTY.
STAR
CHECK
HELP
AUTO RESET
OUTPUT
APPLICATION
SCANNER / PRINTER
FAX
DATA
INTERRU