Konica Minolta 7135 ユーザーズマニュアル
Requirements for Safe Use (continued)
1-6
Environment
CAUTION: Prevention of Fire
Do not install near flammable materials, curtains or
volatile combustibles, that can catch or cause fire.
volatile combustibles, that can catch or cause fire.
CAUTION: Prevention of Short Circuit
Do not install the copier where it could be splashed
with rain water, or water from a tap, to avoid a
short circuit.
with rain water, or water from a tap, to avoid a
short circuit.
CAUTION: Temperature and Humidity
• Keep away from direct sunlight, heat sources
such as stoves, cool air from an air conditioner
and hot air from a heater.
and hot air from a heater.
• Avoid any environment that is outside the range
shown below:
50 to 86°F (10 to 30°C) in temperature
10 to 80% in humidity
10 to 80% in humidity
CAUTION: Ventilation
• Install the machine in a well-ventilated place.
• Keep away from dust or corrosive gases. These materials may cause poor image quality.
• During use, the machine generates ozone in an insufficient amount to cause any
hazard to the human body.
However, if the machine is used in a poorly ventilated room, many copies are made,
or more than one copier is used at the same time, an odor may be detected. Ensure
adequate ventilation for a comfortable working environment.
However, if the machine is used in a poorly ventilated room, many copies are made,
or more than one copier is used at the same time, an odor may be detected. Ensure
adequate ventilation for a comfortable working environment.
CAUTION: Vibration
Do not install on a floor which is subject to vibration or is
not level.
not level.
CAUTION: Transportation
Be sure to contact your service representative when
moving or transporting the machine. If you move the
machine Memory unit installed, machine trouble may be
caused by vibration.
moving or transporting the machine. If you move the
machine Memory unit installed, machine trouble may be
caused by vibration.