KYOCERA 2020D ユーザーズマニュアル

Using the Operation Panel

7-21

1

Press 

Z while Job Box > is displayed.

2

Press 

U or V repeatedly until >Quick Copy appears. The name 

entered in the printer driver (

Harold, in this example) also appears.

3

Press 

[OK]. A blinking question mark (?) appears before the user 

name.

4

Press 

U or V to display the desired user name, Arlen, in this 

example.

5

Press 

[OK]. The job name entered in the printer driver (Report, in 

this example) appear with a blinking question mark (

?) before the 

letters.

6

Press 

U or V to scroll to the desired job title.

7

Press 

[OK]. The number of copies to be printed can be set. To 

increase the copy count, press 

U; to decrease the copy count, press 

V.

8

Press 

[OK] to finalize the copy count. The printer prints the specified 

number of copies for the job.

1

Follow steps 1 through 6 in the above section to let the title of the job 
to be deleted displayed.

2

When the title of the job to be deleted is displayed, e.g. 

Report, 

press 

[OK]. The cursor (_) below the copy count starts to blink.

3

Press 

V repeatedly until Delete appears below the title.

4

Press 

[OK]. The message Processing appears and the stored 

quick copy job is deleted.

When you print multiple copies, this mode first prints one copy so that 
you can proof it before continuing to print the remaining copies. Since 
you can proof the printouts before printing the remaining copies, 
wastage of paper can be reduced.

The printer prints one copy and, at the same time, saves the print job on 
the hard disk/RAM disk. You can also change the number of copies 
when resuming printing from the operation panel.

When the printer is turned off, all stored jobs will be deleted.

>Quick Copy
?Harold

>Quick Copy
?Arlen

>Arlen
?Report

>Report
 Copies     001

>Report
 Copies     001

>Report
 Delete        

Refer to the KX Printer Driver User Guide for the driver 

settings.