KYOCERA 2020D ユーザーズマニュアル

7-42

Using the Operation Panel

In Print Quality menus, you can set the KIR mode, EcoPrint mode, and 
other settings.

The options available in Print Quality are as follows:

KIR Mode (Selecting the KIR mode)

EcoPrint Mode (Selecting the EcoPrint mode)

Resolution (Selecting the Print Resolution)

Print Density (Selecting the Print Density)

1

Press 

Z while Print Settings > is displayed.

2

Press 

U or V repeatedly until >Print Quality > appears.

This printer incorporates the KIR (Kyocera Image Refinement) 
smoothing function. KIR users the software to enhance resolution, 
resulting in high quality printing at resolution of 600 dpi and 300 dpi. The 
default is On. KIR has no effect on the printing speed.

1

Press 

Z while >Print Quality > is displayed.

2

Press 

U or V repeatedly until >>KIR Mode appears.

3

Press 

[OK]. A blinking question mark (?) appears.

4

Select 

On or Off using U or V.

5

Press 

[OK].

6

Press 

[MENU]. The display returns to Ready.

>Print Quality >

Set the print density to 

03 when setting the KIR mode. For 

details on the print density, refer to Print Density (Selecting the 
print density) on page 7-43.

with KIR Off

with KIR On (default)

>>KIR Mode
? On